RANCANG BANGUN MESIN PEMOTONG SERBA GUNA HEMAT ENERGI PENUNJANG PRODUKTIFITAS UKM KERUPUK

Authors

  • Akhmad Hafizh Ainur Rasyid Universitas Negeri Surabaya
  • I Wayan Susila
  • Dewanto Dewanto Universitas Negeri Surabaya
  • Dany Iman Santoso Universitas Negeri Surabaya

DOI:

https://doi.org/10.26740/otopro.v18n1.p7-12

Keywords:

design, cutting machine, energy saving, pulley crackers

Abstract

Puli crackers are an SME business in Indonesia which has a fairly good protein composition and is usually used as souvenirs of Madura. The problems of most Indonesia’s SMEs are still using manual labour with makeshift equipment. and the assistant machines available in the market have a large capacity so they are not easy to use on a household scale with small electrical capacity. The development method used in the design of an energy-efficient general-purpose cutting machine is engineering design until test and evaluate prototype stage. The engine capacity is 1,065 gr/s at the 2nd or 3rd 24 V dimmer speed setting. The result of this design process is the selection of an electric motor driven machine that is adjusted to the required power with reduced direct transmission in order to be able to cut the cracker dough.

References

Badan Pusat Statistik, “Pengeluaran Untuk Konsumsi Penduduk Indonesia,” Jakarta, Mar. 2019. Accessed: Apr. 20, 2022. [Online]. Available: https://www.bps.go.id/publication/download.html

A. Halik, M. Nurhadi, and D. Filbert, “Pelatihan Peningkatan Produktivitas UKM Kerupuk Lontongan Di Dusun Bates Desa Banangkah, Kec. Burneh, Kabupaten Bangkalan,” RESONA : Jurnal Ilmiah Pengabdian Masyarakat, vol. 5, no. 1, p. 1, Jul. 2021, doi: 10.35906/resona.v5i1.627.

R. M. D. Atmowisosro, “Lempeng Puli (Kerupuk Puli) Madiun,” Dec. 21, 2017. https://budaya-indonesia.org/Lempeng-Puli-Kerupuk-Puli-Madiun/ (accessed Oct. 05, 2022).

T. Budiyanto and F. A. Setiyoso, “Designing an Ergonomic-Based Work Facility of Dough Stirrer for Kerupuk Cipir Using Rapid Entire Body Assesment (REBA) Analysis to Reduce Muskuloskeletal Complaints and Increase Productivity,” Logic : Jurnal Rancang Bangun dan Teknologi, vol. 21, no. 2, pp. 87–92, Jul. 2021, doi: 10.31940/logic.v21i2.2454.

I. M. A. Putrawan, I. G. Santosa, and K. Adi, “Redesign and Improvement of Pottery Spinner to Increase Worker Producivity,” Logic : Jurnal Rancang Bangun dan Teknologi, vol. 20, no. 2, pp. 108–112, Jul. 2020, doi: 10.31940/logic.v20i2.1845.

M. Muhaji, “Penerapan TTG Mesin Pengaduk Jeladren dan Risopan Jumbrek di IKM Paciran Lamongan,” Otopro, vol. 15, no. 2, p. 59, May 2020, doi: 10.26740/otopro.v15n2.p59-63.

I. K. Suherman, I. W. Suwirya, and N. W. M. S. Dewi, “Horizontal Coffee Roaster Design with Temperature and Time Control,” Logic: Jurnal Rancang Bangun dan Teknologi, vol. 20, no. 1, pp. 40–45, Mar. 2020, doi: 10.31940/logic.v20i1.1780.

F. A. Prasetiyo and T. Budiyanto, “Designing a Rotary Composter Tool With an Ergonomic Approach to the Organic Garbage Processing Process,” Logic : Jurnal Rancang Bangun dan Teknologi, vol. 20, no. 3, pp. 152–159, Nov. 2020, doi: 10.31940/logic.v20i3.2044.

The Teach Engineering, “Engineering Design Process,” 2018. https://www.teachengineering.org/populartopics/designprocess (accessed Nov. 08, 2022).

Sularso and K. Suga, Dasar Perencanaan dan Pemilihan Elemen Mesin, 12th ed. Jakarta: PT Pradnya Paramita, 2008.

R. T. Indrawati, F. T. Putri, R. A. Rochmatika, and H. Prawibowo, “Peningkatan Kapasitas Produksi melalui Rancang Bangun Mesin Semi Otomatis Pemotong Adonan Kerupuk,” Jurnal Rekayasa Mesin, vol. 16, no. 3, p. 437, Dec. 2021, doi: 10.32497/jrm.v16i3.3072.

E. F. Soeprapto, D. Cahyadi, and A. F. Hidayanto, “Rancang Bangun Mesin Penggiling dan Potong Kerupuk Ikan dengan Menggunakan Gearbox,” Jurnal Riset Teknologi Industri, vol. 12, no. 1, pp. 1–8, May 2018, doi: 10.26578/jrti.v12i1.3536.

I. M. Widiyarta, D. N. K. P. Negara, and I. D. M. K. Muku, “Rancang Bangun Alat Pemotong/Pengiris Bahan Baku Krupuk Terigu dan Kripik Singkong,” Buletin Udayana Mengabdi, vol. 17, no. 1, p. 187, Jan. 2018, doi: 10.24843/BUM.2018.v17.i01.p31.

Downloads

Published

2023-05-25

Issue

Vol 18 No 1 Nov 2022

Section

Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a  Creative Commons: Attribution-NonCommercial 4.0 International (CC BY-NC) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Abstract views: 241 , PDF Downloads: 579