DEVELOPMENT OF TEACHING MATERIALS FOR HANDLING HAZARDOUS AND NON HAZARDOUS WASTE BASED ON SETS
DOI:
https://doi.org/10.26740/jcer.v5n2.p51-60Keywords:
Teaching Materials, SETS, FeasibilityAbstract
Abstract. The purpose of this study is to obtain the feasibility of teaching materials that handle hazardous and non-hazardous waste based on Science, Environment, Technology, and Society (SETS). The research design used refers to the 4-D development model (four-D Models) recommended by Thiagarajan which consists of four stages, namely define, design, develop, and disseminate, which is limited to the development stage. The samples in this study were 34 students of class X 2 SMK Negeri 5 Surabaya. The results showed that the validity of teaching materials obtained a percentage of 83,27% with a very valid category, observation of students 97.62% was very practical, the test of student learning outcomes increased with the acquisition of N-Gain of 0.7 in the category high, as many as 100% of students achieve mastery learning and the questionnaire responses of students as much as 90.59% are very practical. This shows that SETS-based teaching materials on hazardous and non-hazardous waste handling materials for vocational high school students are proper to be used in the learning process.
References
Nli , S., Iw , M., & Ik , S. 2018. Analisis Kesulitan Belajar Kimia Pada Materi Larutan Penyangga Di Sma Negeri 2 Banjar. Jurnal Pendidikan Kimia Undiksha, Volume 2, No. 2, hal. 75-84.
Wulandari, T. N., Ashadi, & Yamtinah, S. 2015. Pengembangan Modul Pereaksii Kimia Berbasis SETS pada Mata Pelajaran Kimia Dasar Kelas X Kimia Industri. Jurnal Inkuiri, Volume 4, No. 4, hal 54-60
Clarke, L and Winch. C. 2007. Vocational Education International Approach, Development and System. New York: Routledge.
Departemen Pendidikan Nasional. 2008. Pengembangan Bahan Ajar dan Media. Jakarta: Departemen Pendidikan Nasional.
Prastowo, A. 2015. Panduan Kreatif Membuat Bahan Ajar Inovatif. Yogyakarta: Diva Press.
Binadja, A. 2005. Pedoman Pengembangan Bahan Pemblajaran Bervisi dan Berpendakatan Bervisi dan Berpendakatan SETS (Science, Environment, Technology, and Society) atau (Sains, Lingkungan, Teknologi dan Masyarakat). Laboratorium SETS: Program Pascasarjana UNNES.
Ichtiakhiri , T. H., & Sudarmaji. 2015. Pengelolaan Limbah B3 dan Keluhan Kesehatan Pekerja Di PT. Inka (Persero) Kota Madiun. Jurnal Kesehatan Lingkungan, Volume. 8, No. 1, hal 118-127.
Abdel-Shafy, H. I., & Mansour, M. S. 2018. Solid waste issue: Source, composition, disposal, recycling, and valorization. Egyptian Journal of Petroleum, Volume 27, hal. 1275-1290.
Binadja, A. 2006. Pedoman pengembangan silabus Pembelajaran Berdasarkan KBK bervisi dan berpendekatan SETS (Science, Environment, Technology, and Society) atau (Sains, Lingkungan, Teknologi, dan Masyarakat). Semarang: Laboratorium SETS Universitas Negeri Semarang.
B. Menalu, F. S., Sulastri, & Hanum, L. 2018. Penerapan Pendekatan Pembelajaran Berbasis Science, Environment, Technology, And Society(SETS) pada Meteri Zat Aditif pada Makanan di Kelas VIII SMPN 15 Banda Aceh. Jurnal Ilmiah Mahapeserta didik Pendidikan Kimia, Volume 3, No. 3, hal. 124-128.
Autieri, S. M., Amirshokoohi, A., & Kazempour, M. 2016. The Science-Technology-Society Framework for Achieving Scientific Literacy: an Overview Of the Existing Literature. European Journal of Science and Mathematics Education, Volume 4, No. 1, hal. 75‐89.
Yulistiana. 2015. Penelitian Pembelajaran Berbasis SETS (Science, Environment, Technology, And Society) dalam Pendidikan Sains. Jurnal Formatif. Volume 5, No. 1, hal. 76-82.
Cattaneo, K. H. 2017. Telling Active Learning Pedagogies Apart: from theory to practice. Journal Of New Approaches In Educational Research, Volume 6, No. 2, hal. 144-152.
Pedretti, E. and Nazir, J. 2011. Currents in STSE Education: Mapping a Complex Field, 40 Years On. Science Education, Volume 95, No. 4, hal. 601-626
Yager, R. E. 1992. The status of science-technology-society reform efforts around the world. Arlington, VA: National Science Teachers Association.
Ibrahim, M. 2014. Model Pengembangan Perangkat Pembelajaran menurut Jerold E. Kemp & Thiagarajan. Surabaya: PSMS PSS Universitas Negeri Surabaya.
Riduwan. 2015. Skala Pengukuran Variabel-Variabel Penelitian. Bandung: Alfabeta CV.
Hake, R., 1998. Interactive-engagement versus traditional methods: A six-thousand-student survey of mechanics test data for introductory physics course. American Journal of Physics. Volume 66, No. 1, hal. 63-74.
A. D. Aprilia, R. Iriani dan S. H. Nurdiniah. 2018. Pengembangan Bahan Ajar Berbasis Advanced Organizer Bervisi Sets (Science, Environment, Technology, And Society) Pada Materi Koloid," Jurnal Inovasi Pendidikan Sains, Volume. 9, No. 1, hal. 38-46.
BSNP. 2014. Instrumen Penilaian Buku Teks Pelajaran Tahun 2014. Jakarta: Badan Standar Nasional Pendidikan
Susanto, Mikke. 2002. Diksi Rupa Kumpulan Istilah Seni Rupa. Yogyakarta: Kanisius.
Arikunto. 2012. Dasar-dasar Evaluasi Pendidikan. Jakarta: Bumi Aksara
Poedjiadi, Anna. 2010. Sains Teknologi Masyarakat: Model Pembelajaran Kontekstual Bermuatan Nilai. Bandung: Remaja Rosdakarya.
Lile, R., & Bran, C. 2014. The assessment of learning outcomes. Social and Behavioral Sciences, Volume 163, hal. 125-131.
Rasyid, A. 2016. Pengembangan Perangkat Pembelajaran Bervisi SETS Berbasis Masalah untuk Meningkatkan Soft Skill dan Pemahaman Konsep. Jurnal Bio Educatio, Volume 1, No. 1, hal. 9-17.
Chanapimuk, K., Sawangmek, S., & Nangngam, P. 2018. Using Science, Technology, Society, and Environment (STSE) Approach to Improve the Scientific Literacy of Grade 11 Students in Plant Growth and Development. Journal of Science Learning, Volume 2, No. 1, hal. 14-20.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 JCER (Journal of Chemistry Education Research)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Abstract views: 216
,
PDF Downloads: 175
