Mechanical and Thermal Properties of Polymer Blends Composites Reinforced with Nano Filler
DOI:
https://doi.org/10.26740/vubeta.v3i1.43562Keywords:
Polymer composites, nano-fillers, mechanical properties, thermal properties, characteristicsAbstract
This study explores the enhancement of the mechanical and thermal properties of polymer blends (high-density polyethylene and polypropylene) by incorporating nanofillers such as carbon nanotubes, graphene oxide, and silica nanoparticles. The effects of varying nanofiller concentrations (1%, 2%, and 3% by weight) on tensile, impact, and flexural strengths, as well as thermal stability using thermogravimetric analysis (TGA), were investigated. The results showed that the addition of carbon nanotubes provided the most significant improvement, with a 50% increase in tensile strength at a 2% concentration. Graphene oxide and silica nanoparticles also improved mechanical properties, though to a lesser extent. The thermal stability was enhanced by all fillers, with carbon nanotube and graphene oxide composites exhibiting higher decomposition temperatures. X-ray diffraction analysis indicated that the inclusion of nanofillers increased the crystallinity of the polymer blends, contributing to the overall material strengthening. The study demonstrates that carbon nanotubes, graphene oxide, and silica nanoparticles significantly enhance both mechanical and thermal properties of polymer composites, making them suitable for applications in industries such as automotive, aerospace, and electronics. Future research should focus on optimizing nanofiller concentrations and evaluating the long-term performance of these materials under real-world conditions.
References
[1] O. Abubakre, R. Medupin, I. Akintunde, O. Jimoh, A. Abdulkareem, R. Muriana et al., "Carbon Nanotube-Reinforced Polymer Nanocomposites for Sustainable Biomedical Applications: A review", Journal of Science: Advanced Materials and Devices, vol. 8, no. 2, pp. 100557, 2023. https://doi.org/10.1016/j.jsamd.2023.100557
[2] M. Aleksanyan, A. Sayunts, G. Shahkhatuni, Z. Simonyan, G. Shahnazaryan, & V. Aroutiounian, "Gas Sensor Based on ZnO Nanostructured Film for the Detection of Ethanol Vapor", Chemosensors, vol. 10, no. 7, pp. 245, 2022. https://doi.org/10.3390/chemosensors10070245
[3] P. Pandit, C. Liu, S. Iacono, G. Corti, & Y. Hu, "Microstructural Characterization and Property of Carbon Fiber Reinforced High-Density Polyethylene Composites Fabricated by Fused Deposition Modeling", Materials, vol. 16, no. 1, pp. 180, 2022. https://doi.org/10.3390/ma16010180
[4] R. Hilal and R. Nassif, "Study on Adsorption of Some Metals from Waste Solution by (Unsaturated Polyester-kaolin) Composite", Kuwait Journal of Science, vol. 50, no. 3, pp. 257-261, 2023. https://doi.org/10.1016/j.kjs.2023.01.010
[5] P. Diwahar, K. Prakalathan, K. Bhuvana, & S. Krishnasamy, "Examining the Mechanical and Thermal Properties of a Novel Hybrid Thermoplastic Rubber Composite Made with Polypropylene, Polybutadiene, S-Glass Fibre, and Flax Fibre", Polymers, vol. 16, no. 24, pp. 3599, 2024. https://doi.org/10.3390/polym16243599
[6] M. Dayekh and S. Hussain, "Gas Sensor and Sensitivity", Metal-Oxide Gas Sensors, 2023. https://doi.org/10.5772/intechopen.108040
[7] E. Ansar, M. Biutty, K. Kim, S. Yoo, P. Huh, & S. Yoo, "Sustainable Polyamide Composites Reinforced with Nanocellulose via Melt Mixing Process", Journal of Composites Science, vol. 8, no. 10, pp. 419, 2024. https://doi.org/10.3390/jcs8100419
[8] W. Aribowo, L. Abualigah, D. Oliva, T. Mzili, A. Sabo, & H. Shehadeh, "Frilled Lizard Optimization to optimize parameters Proportional Integral Derivative of DC Motor", Vokasi Unesa Bulletin of Engineering, Technology and Applied Science, pp. 14-21, 2024. https://doi.org/10.26740/vubeta.v1i1.33973
[9] M. Khan, M. Alam, & S. AHMED, "Effect of Nickel Incorporation on Structural and Optical Properties of Zinc Oxide Thin Films Deposited by RF/DC Sputtering Technique", Materials Physics and Mechanics., vol. 51, no. 1, pp. 19–32, 2023. https://doi.org/10.18149/mpm.5112023_3
[10] C. Carter, "Polymers in the Journal of Materials Science", Journal of Materials Science, vol. 58, no. 46, pp. 17425-17429, 2023. https://doi.org/10.1007/s10853-023-09079-x
[11] S. Güler and B. Özler, "Fabrication and Analysis of Fe3O4/ZnO/Epoxy Composites via Stereolithography: Structural and Photocatalytic Properties", Polymer Composites, vol. 46, no. 5, pp. 4829-4840, 2025. https://doi.org/10.1002/pc.29621
[12] A. Herrmann, S. Erich, L. Ven, H. Huinink, W. Driel, M. Soestbergen et al., "Interphase Effect on the Effective Moisture Diffusion in Epoxy–SiO2 Composites", Microelectronics Reliability, vol. 134, pp. 114550, 2022. https://doi.org/10.1016/j.microrel.2022.114550
[13] E. Fenta and B. Mebratie, "Advancements in Carbon Nanotube-Polymer Composites: Enhancing Properties and Applications Through Advanced Manufacturing Techniques", Heliyon, vol. 10, no. 16, pp. e36490, 2024. https://doi.org/10.1016/j.heliyon.2024.e36490
[14] P. Gowtham, M. Jayasheela, C. Sivamani, & D. Balaji, "Interfacing the IoT in Composite Manufacturing: An Overview", Reviews on Advanced Materials Science, vol. 63, no. 1, 2024. https://doi.org/10.1515/rams-2024-0026
[15] Z. Latif, M. Ali, E. Lee, Z. Zubair, & K. Lee, "Thermal and Mechanical Properties of Nano-Carbon-Reinforced Polymeric Nanocomposites: A Review", Journal of Composites Science, vol. 7, no. 10, pp. 441, 2023. https://doi.org/10.3390/jcs7100441
[16] R. Nassif, A. Haleem, R. Hilal, & A. Nsaif, "Study of the Effect of Zinc Oxide on the Antifungal Action of the Polymer Blend (Unsaturated Polyester and Natural Rubber) for Industrial Applications", Himia, Fizika Ta Tehnologia Poverhni, vol. 16, no. 1, pp. 18-27, 2025. https://doi.org/10.15407/hftp16.01.018
[17] O. Ajayi, A. Umar, I. Ibrahim, L. Olugbenga, & A. Abiola, "Mathematical Modelling of Truck Platoon Formation Based on a Dynamic String Stability", Vokasi Unesa Bulletin of Engineering, Technology and Applied Science, vol. 2, no. 2, pp. 112-126, 2025. https://doi.org/10.26740/vubeta.v2i2.34941
[18] J. Brechtl, Y. Li, K. Li, L. Kearney, K. Nawaz, A. Flores‐Betancourt et al., "Structural, Thermal, and Mechanical Characterization of a Thermally Conductive Polymer Composite for Heat Exchanger Applications", Polymers, vol. 13, no. 12, pp. 1970, 2021. https://doi.org/10.3390/polym13121970
[19] O. Eterigho-Ikelegbe, R. Trammell, E. Ricohermoso, & S. Bada, "Mechanism of Bonding, Surface Property, Electrical Behaviour, and Environmental Friendliness of Carbon/Ceramic Composites Produced via the Pyrolysis of Coal Waste with Polysiloxane Polymer", Environmental Science and Pollution Research, vol. 30, no. 41, pp. 93786-93799, 2023. https://doi.org/10.1007/s11356-023-28661-z
[20] F. Guo, S. Aryana, Y. Han, & Y. Jiao, "A Review of the Synthesis and Applications of Polymer–Nanoclay Composites", Applied Sciences, vol. 8, no. 9, pp. 1696, 2018. https://doi.org/10.3390/app8091696
[21] D. Friedrich, "Branding of Wood-Plastic Composites under Generic Name “Biobased-Plastic” or Specifically as “Wood-Plastic Composite”? A Consumer Study under Compolytics Approach", Journal of Cleaner Production, vol. 470, pp. 143276, 2024. https://doi.org/10.1016/j.jclepro.2024.143276
[22] B. Hiwa, Y. Ahmed, & S. Rostam, "Evaluation of Tensile Properties of Meriz Fiber Reinforced Epoxy Composites using Taguchi Method", Results in Engineering, vol. 18, pp. 101037, 2023. https://doi.org/10.1016/j.rineng.2023.101037
[23] O. Leite-Barbosa, C. Pinto, J. Leite-da-Silva, E. Aguiar, & V. Veiga, "Polymer Composites Reinforced with Residues from Amazonian Agro-Extractivism and Timber Industries: A Sustainable Approach to Enhancing Material Properties and Promoting Bioeconomy", Polymers, vol. 16, no. 23, pp. 3282, 2024. https://doi.org/10.3390/polym16233282
[24] R. Salih, H. Kadhim, & R. Nassif, "Preparation of Polymeric Composite for Antiskid Flooring Purpose", Physica Scripta, vol. 98, no. 8, pp. 085918, 2023. https://doi.org/10.1088/1402-4896/ace2f9
[25] H. Mahmood, "Effect of Nano SiO2 Particles on some Physical Properties of (UP/PU) Blend Composite", Engineering and Technology Journal, vol. 34, no. 1, pp. 93-99, 2016. https://doi.org/10.30684/etj.34.1b.11
[26] A. Bahar, A. Hamami, F. Benmahiddine, S. Belhabib, R. Belarbi, & S. Guessasma, "The Thermal and Mechanical Behaviour of Wood-PLA Composites Processed by Additive Manufacturing for Building Insulation", Polymers, vol. 15, no. 14, pp. 3056, 2023. https://doi.org/10.3390/polym15143056
[27] D. Pietezak, T. Steffen, L. Fontana, C. Dalmolin, & D. Becker, "The Effects of Graphene Oxide and Iron Oxide (II) Co-addition on Properties of a Polypropylene/High-Density Polyethylene Blend", Materials Research, vol. 27, 2024. https://doi.org/10.1590/1980-5373-mr-2023-0554
[28] B. Kadhim, A. Mahdi, & N. Al-Mutairi, "Mechanical and Thermal Properties of PP/HDPE Blends Reinforced with ZnO Nanoparticles for Industrial Applications", International Journal of Nanoelectronics and Materials (IJNeaM), vol. 17, no. 3, pp. 479-486, 2024. https://doi.org/10.58915/ijneam.v17i3.1173
[29] W. Ullah, M. Abbas, S. Khan, A. Flah, C. El‐Bayeh, K. Shoush et al., "Impact of Electro-UV Aging on the Insulation Performance of PVC/ZnO Nanocomposites for Outdoor Applications", IEEE Access, vol. 13, pp. 67415-67433, 2025. https://doi.org/10.1109/access.2025.3559243
[30] M. Vašina, P. Strážnický, P. Hrbáček, S. Rusnáková, O. Bošák, & M. Kubliha, "Investigation of Physical Properties of Polymer Composites Filled with Sheep Wool", Polymers, vol. 16, no. 5, pp. 690, 2024. https://doi.org/10.3390/polym16050690
[31] A. Verma, R. Gupta, A. Verma, & T. Kumar, "A Review of Composite Conducting Polymer-based Sensors for Detection of Industrial Waste Gases", Sensors and Actuators Reports, vol. 5, pp. 100143, 2023. https://doi.org/10.1016/j.snr.2023.100143
[32] Z. Vuluga, "Fiber and Polymer Composites: Processing, Simulation, Properties and Applications II", Polymers, vol. 16, no. 24, pp. 3486, 2024. https://doi.org/10.3390/polym16243486
[33] J. Wen, S. Wang, J. Feng, J. Ma, H. Zhang, P. Wu et al., "Recent Progress in Polyaniline-based Chemiresistive Flexible Gas Sensors: Design, Nanostructures, and Composite Materials", Journal of Materials Chemistry A, vol. 12, no. 11, pp. 6190-6210, 2024. https://doi.org/10.1039/d3ta07687c
[34] Y. Wu, C. Dong, X. Bai, & C. Yuan, "The Roles of T-ZnOw and MoS2 Particles in the Friction-Induced Vibration Reducing the Process of Polymer", Materials & Design, vol. 224, pp. 111361, 2022. https://doi.org/10.1016/j.matdes.2022.111361
[35] S. Yan, Q. Zhao, F. Wang, Y. Bai, T. Liu, W. Guo et al., "Optimization Mechanism of Laminated Ceramic Package Structure on the Regulation of Semiconductor Cooling Performance", Scientific Reports, vol. 15, no. 1, 2025. https://doi.org/10.1038/s41598-025-98104-x
[36] Y. Zhang, X. Yu, & Z. Cheng, "Research on the Application of Synthetic Polymer Materials in Contemporary Public Art", Polymers, vol. 14, no. 6, pp. 1208, 2022. https://doi.org/10.3390/polym14061208
[37] G. Zhigerbayeva, A. Aliyev, Y. Magazov, V. Kudryashov, S. Adilov, & N. Nuraje, "Efficient Template Free Polymerization of Continuously Porous Hybrid Conducting Polymers for Highly Stable Flexible Micro Pseudocapacitors", Scientific Reports, vol. 15, no. 1, 2025. https://doi.org/10.1038/s41598-025-93663-5
[38] D. Abulyazied and A. Ene, "An Investigative Study on the Progress of Nanoclay-Reinforced Polymers: Preparation, Properties, and Applications: A Review", Polymers, vol. 13, no. 24, pp. 4401, 2021. https://doi.org/10.3390/polym13244401
[39] M. Akermi, N. Jaballah, Y. Alajlani, M. Najari, R. Chaâbane, H. Ouada et al., "Original Polymer P-DSBT Nano-Composite with ZnO Nanoparticles for Gas Sensor at Room Temperature", Polymer Bulletin, vol. 79, no. 9, pp. 7827-7842, 2021. https://doi.org/10.1007/s00289-021-03872-x
[40] P. Didier, G. Coz, B. Piotrowski, P. Bravetti, P. Laheurte, & A. Moufki, "Post-Processing of Additive Manufactured Parts: A Numerical Strategy Applied in Maxillary Implantology", Matériaux & Techniques, vol. 110, no. 3, pp. 304, 2022. https://doi.org/10.1051/mattech/2022031
[41] R. Dong, M. Yang, Y. Zuo, L. Liang, H. Xing, X. Duan et al., "Conducting Polymers-Based Gas Sensors: Principles, Materials, and Applications", Sensors, vol. 25, no. 9, pp. 2724, 2025. https://doi.org/10.3390/s25092724
[42] D. Hassana and N. Ali, "Evaluation of Mechanical Properties for Epoxy Reinforced with Palm Oil / Zinc Oxide Composites", Iraqi Journal of Physics (IJP), vol. 20, no. 2, pp. 26-37, 2022. https://doi.org/10.30723/ijp.v20i2.978
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 rafah alwan, Raghad Hamid
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Abstract views: 0
,
PDF Downloads: 0
