ANALYSIS AND MONITORING OF FILLING TOOLS AUTOMATIC TIRE AIR CONTROL THROUGH IOT

Authors

  • Abimanyu Mahardika Putra Kalimantono Politeknik Negeri Malang
  • Moh Hartono Mechanical Engineering Study Program, State Polytechnic of Malang
  • Fatkhur Rohman Mechanical Engineering Study Program, State Polytechnic of Malang
  • Ach Muhib Zainuri Mechanical Engineering Study Program, State Polytechnic of Malang

DOI:

https://doi.org/10.26740/otopro.v22n1.p37-42

Keywords:

Tire Inflation, Compressor, Internet of Things, Pressure Sensor, Automatic control

Abstract

Maintaining proper tire pressure is essential for ensuring vehicle safety, fuel efficiency, and tire durability. However, manual tire inflation often results in inconsistent pressure and human error. This study aims to design and evaluate an IoT-based automatic tire inflation system. The system integrates a compressor, an MPX5700AP pressure sensor, a solenoid valve, a microcontroller, and a mobile application for real-time monitoring and control. Experimental results show a strong linear relationship between pressure and inflation time, with high consistency and minimal deviation. Although the automatic system requires slightly longer inflation time, it provides better accuracy and reliability. The proposed system offers a practical solution for small workshops and self-service applications

References

M. Kusriyanto, A. Frebiyani, R. Kurniawan, and W. Pramono, “Monitoring Tekanan Ban Sepeda Motor Portable Berbasis Android,” Indones. J. Appl. Informatics, vol. 9, p. 231, Nov. 2024, doi: 10.20961/ijai.v9i1.95426.

B. Aryani and M. Tsani, “Pengembangan Sistem Pendeteksi Tekanan Ban Berbasis Internet of Things untuk Otomatisasi Inspeksi Kendaraan,” Infotekmesin, vol. 16, pp. 417–424, Jul. 2025, doi: 10.35970/infotekmesin.v16i2.2763.

A. Pangestu, I. Sodikin, M. Yusro, R. Sapundani, R. Al-Hakim, and S. Wilyanti, IoT–based tire pressure monitoring system for air and temperature pressure using MPX5500D and LM35 sensor. 2022. doi: 10.1109/ICCED56140.2022.10010355.

H. Briantoro, “Penerapan Teknologi IoT pada Sistem Monitoring Tekanan Ban Mobil yang Berjalan,” INOVTEK Polbeng - Seri Inform., vol. 7, p. 308, Nov. 2022, doi: 10.35314/isi.v7i2.2730.

C. Ledesma, C. Tablizo, M. Tabanao, E. Salcedo, E. Requillo, and J. Cruz, “Systematic Review on Automation of Central Tire Inflation System Based on Terrain Conditions,” Eng. Proc., vol. 92, p. 67, May 2025, doi: 10.3390/engproc2025092067.

A. Choudhary, “Internet of Things: a comprehensive overview, architectures, applications, simulation tools, challenges and future directions,” Discov. Internet Things, vol. 4, Dec. 2024, doi: 10.1007/s43926-024-00084-3.

A. Dauda, O. Flauzac, and F. Nolot, “A Survey on IoT Application Architectures,” Sensors, vol. 24, p. 5320, Aug. 2024, doi: 10.3390/s24165320.

S. Waheed, S. Hanif, R. Hafeez, M. Sharif, K. Siddique, and Z. Akhtar, “A Comprehensive Survey on Applications, Challenges, Threats and Solutions in IoT Environment and Architecture,” J. Comput. Sci., vol. 20, pp. 310–332, Mar. 2024, doi: 10.3844/jcssp.2024.310.332.

A. H. Saqib, M. ; Moon, “A concise review on Internet of Things: Architecture, enabling technologies, challenges, and applications,” Int. J. Sensors, Wirel. Commun. Control, vol. 12, no. 9, pp. 629–650, 2022, doi: 10.2174/2210327913666221216160435.

J. P. Dias, A. Restivo, and H. S. Ferreira, “Designing and constructing Internet-of-Things systems: An overview of the ecosystem,” Internet of Things, vol. 19, 2022, doi: 10.1016/j.iot.2022.100529.

E. Sunarno, A. T. Nugraha, and R. A. Sobhita, “IoT-Based Air Compressor Monitoring System in Air Distribution Systems,” J. Electr. Mar. Its Appl., vol. 3, no. 1, 2025.

F. Restu, R. Hakim, and H. K. Ramadhana, “Rancang Bangun Alat Tambal Ban Dalam Sepeda Motor,” J. Technopreneur, vol. 8, no. 1, pp. 18–25, 2020, doi: 10.30869/jtech.v8i1.546.

A. Saleh and M. Fitriana, “Desain mesin tambal ban tubeles 1), 2),” vol. 14, no. 3, pp. 206–211, 2020.

S. Febriani, “Descriptive analysis of standard deviation,” J. Pendidik. Tambusai, vol. 6, no. 1, pp. 910–913, 2022, doi: 10.31004/jptam.v6i1.8194.

M. Benkova, D. Bednárová, and B. Gabriela, “Process Capability Evaluation Using Capability Indices as a Part of Statistical Process Control,” Mathematics, vol. 12, p. 1679, May 2024, doi: 10.3390/math12111679.

Downloads

Published

2026-11-20

How to Cite

Kalimantono, A. M. P., Hartono, M., Rohman, F., & Zainuri, A. M. (2026). ANALYSIS AND MONITORING OF FILLING TOOLS AUTOMATIC TIRE AIR CONTROL THROUGH IOT. Otopro, 22(1), 37–42. https://doi.org/10.26740/otopro.v22n1.p37-42

Issue

Section

Articles
Abstract views: 7 , PDF Downloads: 0

Most read articles by the same author(s)

Similar Articles

You may also start an advanced similarity search for this article.