RANCANG BANGUN DAN UJI COBA ENGINE CLEANER SEBAGAI PENUNJANG PRAKTEK TEKNOLOGI MOTOR BENSIN
DOI:
https://doi.org/10.26740/otopro.v17n2.p33-37Keywords:
overhauls, engine cleaners, waste gasolineAbstract
Overhaul is one of the activities carried out to restore engine performance so that it appears close to its previous condition both in terms of power and fuel consumption. In carrying out an overhaul, ideally, the engine components must first be cleaned of scale and dirt. Referring to these problems, the purpose of this research is to design an engine cleaner technology which is used as an alternative solution. Through the engine cleaner, the gasoline waste from the rinse will be processed so that it does not pollute the environment. This research is a design type which is carried out by considering several factors such as design, strength, ergonomics, material requirements and cost. The research data analysis technique refers to quantitative descriptive. The research data is then presented in the form of a bar chart according to predetermined indicators to measure the efficiency and quality of the engine cleaner. Based on the results of the research, the engine clear technology functions according to the design results. In addition, in terms of convenience and usefulness, both lecturers and students are greatly helped by this technology so that in the process of cleaning machine components. Thus, the process of cleaning the components of the practicum machine is cleaner than cleaning manually.
References
T. H. Lim, S. Bari, and C. W. Yu, “Using Crude Palm Oil (CPO) as Diesel Engine Fuel,” ASEAN J. Sci. Technol. Dev., vol. 19, no. 2, pp. 1–13, Dec. 2017, doi: 10.29037/ajstd.334.
Auto 2000, “Mengenal Overhaul Mesin dan Tujuannya,” 2021. https://auto2000.co.id/berita-dan-tips/overhaul-adalah# (accessed Dec. 16, 2021).
B. Kurniawan, “Pengawasan Pengelolaan Limbah Bahan Berbahaya dan Beracun (B3) di Indonesia Dan Tantangannya,” Din. Gov. J. Ilmu Adm. Negara, vol. 9, no. 1, Apr. 2019, doi: 10.33005/jdg.v9i1.1424.
G. Rubiono and R. M. Yasi, “Sosialisasi Manajemen Limbah Oli Bengkel Mobil,” J. Apl. Tek. dan Pengabdi. Masy., vol. 1, no. 1, pp. 5–9, 2017.
M. Dahlan, R. Winarso, and S. Slamet, “Rancang Bangun Mesin Pengolah Limbah Kain dan Kertas Sebagai Bahan Industri Eternit,” Teknik, vol. 37, no. 1, p. 1, 2016, doi: 10.14710/teknik.v37i1.8695.
A. Sokhibi, “Perancangan Kursi Ergonomis Untuk Memperbaiki Posisi Kerja pada Proses Packaging Jenang Kudus,” Rekayasa Sist. Ind., vol. 3, no. 1, pp. 61–72, 2017.
Rasta and A. Rahman, “Perancangan Mesin Ampia Berkapasitas 10 Kg/Jam,” J. Teknol. Mesin Uda, vol. 1, no. 1, pp. 17–22, 2020.
K. T. Utami and S. Syafrudin, “Pengelolaan Limbah Bahan Berbahaya Dan Beracun (B3) Studi Kasuspt. Holcim Indonesia, Tbk Narogong Plant,” J. Presipitasi Media Komun. dan Pengemb. Tek. Lingkung., vol. 15, no. 2, p. 127, 2018, doi: 10.14710/presipitasi.v15i2.127-132.
A. Annafiyah, S. Anam, and M. Fatah, “Rancang Bangun Sprayer Pestisida Menggunakan Pompa Air DC 12 V dan Panjang Batang Penyemprot 6 Meter,” J. Rekayasa Mesin, vol. 16, no. 1, p. 90, 2021, doi: 10.32497/jrm.v16i1.2195.
M. F. Dzikriansyah, “Analisa pengaruh jarak nozzle dan tekanan udara pada pelapisan dengan metode air spray terhadap sifat magnetik komposit barium heksaferrit polianilin,” 2017.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons: Attribution-NonCommercial 4.0 International (CC BY-NC) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.