A Sudy of the Occupational Safety and Health Management System (SMK3) in Construction Companies (Case Study: Occupational of the Viar or TosaShowroom Building)
Kajian Sistem Manajemen Keselamatam dan Kesehatan Kerja (SMK3) pada Perusahaan Konsruksi Bangunan (Studi Kasus: K3 Pembangunan Gedung Showroom Viar)
DOI:
https://doi.org/10.26740/proteksi.v8n1.p89-95Keywords:
Construction, Occupational Safety and Health, Work Accidents, Work QualityAbstract
This study aims to examine the occupational safety and health (OSH) management system in a construction company, specifically in the Viar or Tosa showroom construction project. It also analyzes workplace accident prevention efforts and the impact of occupational health on work quality. The study employs an observational approach with a descriptive method, while data were analyzed quantitatively using SPSS software. The findings reveal that most workers (92.3%) understood the implementation of the OSH management system, supported by the availability of personal protective equipment (PPE) such as helmets, vests, gloves, and safety shoes. In terms of accident prevention, 88.4% of workers were involved in planning OSH programs, reflecting the company’s commitment to workplace safety. The study further shows that all workers consistently applied the use of PPE during construction activities. Moreover, occupational health practices were found to have a significant influence on work quality, as the majority of workers recognized the importance of the OSH management system in ensuring safety and improving productivity.
References
Abdullah, Z. (2018). Analisis Pengaruh Keselamatan dan Kesehatan Kerja (K3) Terhadap Kinerja Pekerja Konstruksi (Studi Kasus Proyek The Manhattan Mall & Condominium). Teras Jurnal. https://doi.org/10.29103/tj.v8i1.144
Amperajaya, M. D., & Stefany. (2005). Implementasi Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK-3) pada PT.X Tangerang. Jurnal Inovisi, 4(2).
Anggana M, Johari GJ, Saptiansyah R. Evaluasi Penerapan Sistem Manajemen K3 pada Proyek Konstruksi Gedung Bertingkat. J Konstruksi. 2025;23(2):1–14.
Annisa NU, Widiana DR, Disrinama AM, Santoso Y. Kesiapan Implementasi PP No. 50 Tahun 2012 di Perusahaan Jasa Layanan Konstruksi dengan Metode Gap Analysis. J Teknol Marit. 2024;6(2):22–27.
Departemen Tenaga Kerja RI. (1970). Undang-Undang No. 1 Tahun 1970 tentang Keselamatan Kerja. Depnaker RI.
Departemen Tenaga Kerja RI. (1996). Peraturan Menteri Tenaga Kerja RI No. Per-05/MEN/1996 tentang Sistem Manajemen Keselamatan dan Kesehatan Kerja. Depnaker RI.
Irawan CN, Widiawan K. Perancangan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di PT X Berdasarkan Peraturan Pemerintah Nomor 50 Tahun 2012. J Titra. 2023;11(2):127–134.
Jula. (2013). Klasifikasi Dengan Metode Pembobotan (Scoring).
Kembarajaya IK, Pamungkas TH, Partama IGNE. Implementasi Sistem Manajemen Keselamatan dan Kesehatan Kerja Konstruksi di Indonesia: Studi Literatur. J Tek Gradien. 2025;18(1):1–12.
Pemerintah RI. (2012). Peraturan Pemerintah No. 50 Tahun 2012 tentang Sistem Manajemen Keselamatan dan Kesehatan Kerja.
Ramli, S. (2018). Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001. PT. Dian Rakyat.
Siagian, S. (2007). Manajemen Sumber daya Manusia. PT. Bumi Aksara.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Maulidya Octaviani Bustamin, Wisnu Abiarto Nugroho, Petrus Para Mite

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Abstract views: 1
,
PDF Downloads: 2







