Analysis of Occupational Accident Risk Control Efforts at PT. XYZ Using the Job Safety Analysis (JSA) and Hazard Identification Risk Assessment (HIRA) Methods: Analisis Risiko Kecelakaan Kerja Pada PT. XYZ Menggunakan Metode Job Safety Analysis (JSA) Dan Hazard Identification Risk Assessment (HIRA)

Rezi Berliana Yasinta; Farhan Ahmad; Adi Darmawan; Zaki Al Fattah Putra Firmansyah

Authors

Rezi Berliana Yasinta Universitas Negeri Jakarta
Farhan Ahmad Universitas Negeri Jakarta
Adi Darmawan Universitas Negeri Jakarta
Zaki Al Fattah Putra Firmansyah Universitas Negeri Jakarta

Keywords:

Job Safety Analysis (JSA), Occupational Health and Safety (OHS), Workplace Accidents, Hazard Identification Risk Assessment (HIRA)

Abstract

This study aims to analyze the risk of occupational accidents occurring in the production section of PT. XYZ, an automotive manufacturing company. The risk analysis was conducted using the Job Safety Analysis (JSA) and Hazard Identification Risk Assessment (HIRA) methods. The primary data, which consists of occupational accident records from PT. XYZ, is secondary data indicating that in 2023, a total of 61 workplace accidents occurred. Additional data required to validate this research were obtained through literature review. The results of this study include a risk ranking that contains the risk values of occupational accidents obtained through the HIRA method and information on control efforts obtained through the JSA method. The conclusion drawn from the analysis shows that four types of workplace accidents are classified as low-risk, two types as medium-risk, and the control efforts for most types of accidents involve increasing worker awareness and supervision regarding the use of personal protective equipment (PPE) in accordance with standard operating procedures (SOPs), as part of fulfilling occupational health and safety (OHS) aspects in the company.

References

Afnella, W., & Utami, T. N., 2021, “Analisis Risiko Kecelakaan Kerja Metode HIRA (Hazard Identification and Risk Assessment) di PT. X”, Jurnal Kesehatan Masyarakat, Vol. 5 No. 2, pp. 1004-1012.

Balili, S., & Yuamita, F., 2022, “Analisis Pengendalian Risiko Kecelakaan Kerja Bagian Mekanik Pada Proyek PLTU Ampana (2x3 MW) Menggunakan Metode Job Safety Analysis (JSA)”, Jurnal Teknologi dan Manajemen Industri Terapan, Vol. 1 No. 2, pp. 61-69.

Bramasto, T., & Zainafree, I., 2015, “Penggunaan Job Safety Analysis dalam Identifikasi Risiko Kecelakaan Kerja di Bagian Workshop PT. Total Dwi Daya Kota Semarang”, Unnes Journal of Public Health, Vol. 4 No. 4.

Delvika, Y, 2017, “Penerapan Sistem Manajemen Kesehatan Dan Keselamatan Kerja Pada Pabrik Pakan Ternak Di Kota Medan”, Jurnal Sistem Teknik Industri, Vol. 19 No. 2, pp. 58-64.

Dewi, N. N., & Sundari, S., 2021, “Pengaruh (K3) Dan Motivasi Terhadap Kinerja Karyawan Di Perusahaan”, IQTISHADequity jurnal MANAJEMEN, Vol. 3 No. 2, pp. 278-289.

Harahap, I. M., Purwandito, M., Samudra Jl, U., Syarief Thayeb, P., & Lama, L., 2022, “Analisis risiko keselamatan dan kesehatan kerja (K3) melalui metode HIRADC dan metode JSA pada proyek lanjutan pembangunan rumah sakit regional Langsa”, Menara J Tek Sipil, Vol. 17 No. 2, pp. 43-50.

Ikhsan, M. Z., 2022, “Identifikasi Bahaya, Risiko Kecelakaan Kerja Dan Usulan Perbaikan Menggunakan Metode Job Safety Analysis (JSA)”, Jurnal Teknologi Dan Manajemen Industri Terapan, Vol. 1 No. I, pp. 42-52.

ILO., 1998, “Encylopedia of Occupational Health and Safety”, Volume 1-4. 4th Edition. Stellman, Jeane Mager (ed). Geneva., http://www.ilo.org/safework_bookself - accessed: 19-06-25.

Indriyanti, L. A., & Prastawa, H., 2024, “Analisis Risiko Kerja Menggunakan Job Safety Analysis (Jsa) Dengan Pendekatan Hazard Identification, Risk Assessment, Risk Control (Hirarc) Pada Bagian Converting Pt Jawasurya Kencana Indah”, Industrial Engineering Online Journal, Vol. 13 No. 1.

Irfan, M., & Susilowati, I. H., 2021, “Analisa manajemen risiko K3 dalam industri manufaktur di Indonesia: literature review”, PREPOTIF: Jurnal Kesehatan Masyarakat, Vol. 5 No. 1, pp. 335-343.

Kementerian Ketenagakerjaan Republik Indonesia., 2023, “Kecelakaan Kerja Tahun 2023”, Satu Data Ketenagakerjaan, https://satudata.kemnaker.go.id/data/kumpulan-data/1728 - accessed: 19-06-25.

Marfiana, P., Ritonga, H. K., & Salsabiela, M., 2019, “Implementasi job safety analysis (JSA) sebagai upaya pencegahan kecelakaan kerja”, Jurnal Migasian, Vol. 3 No. 2, pp. 25-32.

Maritza, A. P., 2024, “Analisis Bahaya Kerja Sebagai Upaya Pencegahan Kecelakaan Pada Pekerja Pemeliharaan Lokomotif menggunakan Hazard Identification and Risk Assesment (HIRA), dan Job Safety Analysis (JSA) PT Kereta Api Indonesia (Persero) Upt Balai Yasa Yogyakarta”, (Doctoral dissertation, Universitas Islam Indonesia).

Nuryono, A., & Aini, M. N., 2020, “Analisis bahaya dan resiko kerja di industri pengolahan teh dengan metode HIRA atau IBPR”, Journal of Industrial and Engineering System, Vol. 1 No. 1, pp. 65-74.

Sinaga, G., Septarini, I. R., & Sembiring, A. C., 2024, “Implementasi Job Safety Analysis dan Hazard Identification Risk Assessment and Determining Control untuk meminimalkan Bahaya Kecelakaan Kerja di Stasiun Rebusan Pabrik PTPN III PKS Rambutan (Persero)”, Jurnal Ilmiah Teknik Industri Prima (JURITI PRIMA), Vol. 7 No. 2.

Sulistiyowati, R., & Herdiman, L., 2023, “Analisis keselamatan dan kesehatan kerja pada kegiatan praktikum menggunakan metode HIRA”, Indonesian Journal of Laboratory, Vol. 1 No. 1, pp. 52-59.

Ubongeh, 2022, “The Importance of Health and Safety in Automotive Industry”, https://hsewatch.com/importance-of-health-and-safety-in-the-automotive-industry/ - accessed: 19-06-25.

Wangi, V. K. N., Bahiroh, E., & Imron, A., 2020, “Dampak Kesehatan Dan Keselamatan Kerja, Beban Kerja, Dan Lingkungan Kerja Fisik Terhadap Kinerja Karyawan”, Jurnal Manajemen Bisnis, Vol. 7 No. 1, pp. 40-50.

Widyadhana, A. N., & Apsari, A. E., 2023, “Analisis keselamatan dan kesehatan kerja (K3) dengan metode hira dan scat (studi kasus: pt. Surya Karya Setiabudi)”, (Doctoral dissertation, Tesis doktoral, University of Technology Yogyakarta).

Zulkarnaen, Z., & Ramdhan, D. H., 2023, “Analisis Faktor-Faktor Yang Berhubungan Dengan Kecelakaan Kerja Pada Pekerja Bagian Produksi Di PT. XYZ”, Jurnal Cahaya Mandalika ISSN 2721-4796 (online), Vol. 3 No. 2, pp. 728-741.