Perhitungan Cooling Capacity Yang Dibutuhkan Pada Kapal Tanker 17500 LTDW Cooling Capacity Calculations Required On Tanker Ship 17500 LTDW

Authors

  • Syeihan Syahrul Syah Jurusan Teknik Mesin Universitas Negeri Surabaya
  • Novi Sukma Drastiawati Jurusan Teknik Mesin Universitas Negeri Surabaya
  • Helmy Taufan PT Pal Indonesia (Persero)

DOI:

https://doi.org/10.26740/otopro.v14n1.p6-12

Keywords:

Cooling Capacity, Kapal, HVAC, temperatur, kelembaban

Abstract

Jurnal ini menjelaskan tentang perhitungan cooling capacity yang dibutuhkan pada Kapal Tanker 17500 LTDW, perhitungan cooling capacity bertujuan untuk mengetahui daya compressor yang dibutuhkan pada system pendingin. Metode yang digunakan adalah menghitung cooling capacity berdasarkan GA (General Arranggement) yang mencakup beberapa parameter yaitu jumlah orang, jumlah jendela, volume ruangan, equipment, dan panas dari lampu. Sehingga didapatkan perhitungan Heat  Calculation, Air Capacity, dan Cooling capacity pada sebuah kapal tanker. Hasil penelitian ini menunjukkan bahwa cooling capacity kapal Tanker 17500 LTDW sebesar 487,87 kW.

References

ASHRAE Handbook,1997. Fundamental SI Edition.

ASHRAE Handbook,2001. Fundamental SI Edition.

Burdick, A. (2011). Strategy Guideline: Accurate Heating and Cooling Load Calculations, (June). https://doi.org/10.2172/1018100.

Husodo, B. Y., & Br. Siagian, N. A. (2014). Analisa audit konsumsi energi sistem, 5(1), 4958.

Jaya, Dardiri. (2017). œLaporan On The Job Training Di PT. PAL Indonesia (Persero). Laporan Praktik Industri PT. PAL Indonesia (Persero).

Moran, M. J., & Shapiro, H. N. (1998). Fundamentals of engineering thermodynamics: SI version. Chichester: John Wiley.

PT. PAL Indonesia. 2000. Basic Design (HOD). Surabaya: PT. PAL Indonesia (Persero).

Sumaryanto. (2013). Konsep Dasar Kapal, 1136.

Utomo, B. (2007). Sistem Ventilasi dalam Kapal. Teknik, 28(1), 7682.

Widhikdho, Ade (2017). œLaporan Praktik Industri Proses Pembuatan Bucket Cat 320-D di PT. Sarana Mitra Sejati. Laporan Praktik Industri PT. Sarana Mitra Sejati.

Downloads

Published

2019-06-18

Issue

vol 14 No 1 Nov 2018

Section

Article

License

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a  Creative Commons: Attribution-NonCommercial 4.0 International (CC BY-NC) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Abstract views: 380 , PDF Downloads: 2341