ANALISIS KEKUATAN IMPACT KOMPOSIT POLYESTER BERPENGUAT SERBUK KAYU JATI DENGAN VARIASI FRAKSI VOLUME MATRIKS DAN REINFORCEMENT

Authors

  • Kadek Ariantika Universitas Pendidikan Ganesha
  • I Gede Wiratmaja Universitas Pendidikan Ganesha
  • I Nyoman Pasek Nugraha Universitas Pendidikan Ganesha

DOI:

https://doi.org/10.26740/otopro.v19n2.p50-54

Keywords:

Volume Fraction, Composite Impact, Polyester matrix

Abstract

The biggest problem facing the automotive industry today is limited natural resources and environmental protection. Therefore, it is very important to conduct and carry out research and mapping of alternative materials that can reduce the use of non-renewable materials. The aim of this research is to determine the effect of variations in the volume of teak wood powder on the impact strength of composites with a polyester polymer matrix and identify fracture patterns. This research uses an experimental design combined with one-way statistical analysis of variance to test the research hypothesis. The results showed that there were significant differences in impact strength between the variations of the three specimens tested. Specimens with variations in volume fraction of 20%:80% for teak wood powder and polyester resin have the highest impact strength, while specimens with variations in volume fraction of 30%:70% for teak wood powder and polyester resin have the lowest impact strength. Apart from that, examination of the microscopic structure of the fracture patterns shows differences in fracture patterns between specimens. Specimens with variations in volume fraction of 0% (100% polyester resin) show a brittle fracture mechanism, while specimens of 10%:90%, 20%:80%, 30%:70% for teak wood powder and polyester resin show that the fracture pattern that appears is a combination of fragility and fibular fracture which is also called a fibrous fracture.

References

Kosjoko. (2014). Pengaruh Perendaman (NaOH) Terhadap Kekuatan Tarik dan Bending Bahan Komposit Serat Bambu Tali (Gigantochloa Apus) Bermatriks Polyester. Info Teknik, 15(2), 139–148.

Yudistira, 2020. P. H. (2021). Analisis Pengaruh Variasi Waktu Perlakuan Alkali Terhadap Kekuatan Impact Komposit Polyester Yang Diperkuat Serat Bambu.

Kusumastuti, A, (2009), Aplikasi Serat Sisal Sebagai Komposit Polimer, Jurnal Kompetensi Teknik Vol 1.No.1. Jurusan Teknologi Jasa dan Produksi, Universitas Negeri Semarang.

Nurhidayat. (2014). Pengaruh Fraksi Volume Serat Cantula Terhadap Ketangguhan Impak Komposit Cantula-HDPE Daur Ulang Sebagai Bahan Core Lantai Ramah Lingkungan. Jurnal Teknologi, vol. 7, 2014.

Mastur, Khanif Setiyawan., (2016), pengaruh komposit serat pandan samak terhadap kekuatan tarik dan bending pada material bodi kendaraan, Teknik Mesin STT Wiworotomo Purwokerto.

Gapsari, F., Setyarini P. H. , (2010), Pengaruh Fraksi Volume Terhadap Kekuatan Tarik Dan Lentur Komposit Resin Berpenguat Serbuk Kayu, Jurnal Rekayasa Mesin Vol.1, No. 2 Tahun 2010 : 59-64, Teknik Mesin, Universitas Brawijaya.

Mamur, La Ode, Muhammad Hasbi, Prinob Aksar, (2016), Kajian Eksperimental Sifat Mekanik Material Komposit Serat Tangkai Sagu Dipadukan Dengan Serbuk Gergaji Kayu Jati, Fakultas Teknik Halu Oleo.

ASTM D6110-04, (2017) Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics.

Fred N. Kerlinger. (2000). Asas-Asas Penelitian Behavioral, terj., Drs. Landung R. Simatupang. Yogyakarta: Gadjah Mada University Press, 2000. Hlm: 483.

Downloads

Published

2024-05-29

How to Cite

Ariantika, K., Wiratmaja, I. G., & Nugraha, I. N. P. (2024). ANALISIS KEKUATAN IMPACT KOMPOSIT POLYESTER BERPENGUAT SERBUK KAYU JATI DENGAN VARIASI FRAKSI VOLUME MATRIKS DAN REINFORCEMENT. Otopro, 19(2), 50–54. https://doi.org/10.26740/otopro.v19n2.p50-54

Issue

Vol 19 No 2 Mei 2024

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a  Creative Commons: Attribution-NonCommercial 4.0 International (CC BY-NC) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Abstract views: 41 , PDF Downloads: 46