RANCANG BANGUN TURBIN KINETIK SUDU BERENGSEL LUAR SEBAGAI PEMBANGKIT LISTRIK SKALA PIKOHIDRO

Authors

  • Silvy Dollorossa Boedi Politeknik Negeri Manado
  • Alfred Noufie Mekel Jurusan Teknik Mesin, Politeknik Negeri Manado
  • Adrian Maidangkay Jurusan Teknik Mesin, Politeknik Negeri Manado

DOI:

https://doi.org/10.26740/otopro.v17n2.p69-75

Keywords:

turbine, kinetic, blade

Abstract

The problem of energy shortages is still a global problem which is especially felt in developing countries whose residents live in villages, which still require the development of more efficient energy sources. The problem of meeting the availability of electricity in rural areas by utilizing water energy as new and renewable energy is a long-term goal in this research.  The goal is to obtain the value of the turbine power from the turbine design which is designed to later be able to fulfill a picohydro scale power plant. The current research on kinetic turbines is a combination of two types of waterwheels, which have a vertical axis (overshot turbine and pusher turbine). Most water turbines have fixed blades. In this research, the target of the novelty is a kinetic turbine with a vertical shaft which has a hinged blade. Hinged blades are blades that can move when the flow of water hits the blades, so that on one side of the turbine it will reduce negative torque and on the other hand it will increase turbine rotation. The results of the research that became the target were to obtain a turbine design that has more optimal turbine power and efficiency, compared to a turbine that has a fixed blade, so that this externally hinged blade kinetic turbine can contribute to the provision of rural electrical energy. The optimum value in this study is the number of blades 10 and turbine power 59.01 Watt.

References

Warsito, Wahyu, S. Wahyudi dan Wildan, (2010), Realisasi dan analisis sumber energi baru terbarukan nanohidro dari aliran berdebit kecil, Jurnal Material dan Energi Indonesia, Volume 01 Nomor 01, Jurusan Fisika FMIPA Universitas Padjadjaran

Sornes K. 2010. Small-Scale Water Curent Turbines for River Applications. Zero Emmision Resources Organization.

Soenoko R., Rispiningtati, and Sutikno D., (2011), Prototype of A Twin Kinetik Turbine Performance as A Rural Electrical Power Generation, Journal of Basic and Applied Scientific Research, Departemen of Mechanical Engineering, Faculty of Engineering, University of Brawijaya, Malang, Indonesia.

Ariadi H. Nugroho dan Hartono. 2011. Studi Numerik dan Eksperimental Performansi Turbin Arus Air Tipe Vertikal Aksis dengan Variasi Jumlah Blade dan Efek Aspect Ratio. Teknik Fisika Fakultas Teknology Industri ITS.

Eric Bibeau, Shamez Kassam, John Wood, Tom Molinski, and Clayton Bear. 2009. Operating A 5-KW Grid-Connected Hydrokinetic Turbine In a River In Cold Climates. The Journal of Ocean Technology.

Bono dan Indarto, (2008), Karakterisasi Daya Turbin Pelton Mikro dengan Variasi Bentuk Sudu.

Ohoirenan, Slamet Wahyudi, Djoko Sutikno, (2012), Pengaruh variasi jumlah sudu mangkok terhadap kinerja turbin kinetik, Seminar Nasional Science Engineering and Technology, SciETec Fakultas Teknik UB, Malang.

Yani, Slamet Wahyudi, Deny W., (2012), Pengaruh variasi panjang sudu mangkok terhadap kinerja turbin kinetik, Seminar Nasional Science Engineering and Technology, SciETec Fakultas Teknik UB, Malang.

Asroful A., Rudy Soenoko, Denny W., (2013), Pengaruh Variasi Sudut Input Sudu Mangkok Terhadap Kinerja Turbin Kinetik, Seminar Nasional Science Engineering and Technology, SciETec Fakultas Teknik UB, Malang.

Kaprawi, (2011), Pengaruh Geometri Sudu dari Turbin Air Darrius Terhadap Kinerjanya, Prosiding Seminar Nasional AvoER ke-3, Palembang.

Bo Yang and Chris Lawn, (2011), Fluid dynamic performance of a vertikal axis turbine for tidal currents, Renewable Energi 36, 3355-3366.

Bo Yang and Chris Lawn, (2012), Three dimensional effects on the performance of a vertikal axis tidal turbine, Ocean Engineering 58, 1-10.

Yesung Allo Padang, I Dewa Ketut Okariawan dan Mundara Wati, 2014, Analisis variasi jumlah sudu berengsel terhadap unjuk kerja turbin cross flow zero head, Dinamika Teknik Mesin, Volume 4 No.1

Downloads

Published

2022-05-11

Issue

Vol 17 No 2 Mei 2022

Section

Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a  Creative Commons: Attribution-NonCommercial 4.0 International (CC BY-NC) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Abstract views: 236 , PDF Downloads: 298