EVALUATION OF SMAW WELDING PROCESS TIME USING AN ERGO-MECHANICAL WORKTABLE
DOI:
https://doi.org/10.26740/otopro.v22n1.p43-51Keywords:
ergo-mechanical, worktable, welding, processing time, coefficient of variation.Abstract
The manual welding process can be influenced by the conditions of the work facilities used by the operator, particularly in tasks that require adjustments to the working posture during welding. This study aims to analyze welding time characteristics following the implementation of an ergo-mechanical workbench for 90° and 180° joints. The experiment involved 10 workers from small-scale welding workshops who had practical experience in SMAW welding but did not hold formal welding competency certificates. The data analyzed included welding time, standard deviation, Coefficient of Variation (CV), and the percentage reduction in time. The results showed that the average welding time for 90° joints decreased from 57.90 seconds without a workbench to 41.33 seconds with a workbench, while for 180° joints, it decreased from 47.03 seconds to 35.13 seconds. The percentage reductions in time reached 28.62% and 25.30%, respectively. The coefficient of variation (CV) increased from 11.10% to 19.80% for the 90° joint and from 14.69% to 22.07% for the 180° joint, indicating greater relative variability in welding time compared with the mean and less uniform process time responses among workers and repetitions under the worktable condition. Overall, this study provides an experimental evaluation of the previously developed ergo-mechanical worktable by demonstrating its potential to reduce SMAW welding process times for both 90° and 180° joint configurations. Thus, the main contribution of this study is the quantitative assessment of welding process time and its variability under working conditions with and without the previously developed worktable.
References
ISO 6385:2016, Ergonomics principles in the design of work systems (3rd ed., International Organization for Standardization, 2016)
M.D. Alam, I.A. Khan, Optimization of ergonomic parameters in overhead arc welding using grey relational analysis. Journal of Biomechanics. 189, 112823 (2025) https://doi.org/10.1016/j.jbiomech.2025.112823
M. Muharam, M.A. Puspasari, Designing welding workstations to reduce the risk of MSDS (musculoskeletal disorders). Jurnal Indonesia Sosial Teknologi. 5(9), 4614-4629 (2024) https://doi.org/10.59141/jist.v5i9.3314
S.M. Hosseini, M.A. Lahoori, Z.R. Kahaki, The effectiveness of ergonomic intervention in work-related postures and upper crossed syndrome of metal industry workers. La Medicina del Lavoro. 116(4), 16165 (2025) https://doi.org/10.23749/mdl.v116i4.16165
T. Manggala, W.I. Nugroho, A. Khoryanton, Rancang bangun welding fixture pada proses pengelasan produk inner joint untuk mengurangi produk NG (not good) dan menurunkan waktu proses produksi. Journal of Mechanical Engineering and Applied Technology. 2(2), 71-76 (2024) https://doi.org/10.32497/jmeat.v2i2.5737
F. Fiedler, J. Ehrenstein, C. Höltgen, A. Blondrath, L. Schäper, A. Göppert, R. Schmitt, Jigs and fixtures in production: A systematic literature review. Journal of Manufacturing Systems. 72, 373-405 (2024) https://doi.org/10.1016/j.jmsy.2023.10.006
H. Rizka, M. Matahelumual, M.T.N. Ramadhan, G. Heryana, Redesain alat pencekam plat dalam konteks jig and fixture pada proses pengelasan di meja kerja. Jurnal Mekanik Terapan. 5(2), 113-120 (2024) https://doi.org/10.32722/jmt.v5i2.6545
A.Y. Tripariyanto, L. Dewi, A. Komari, J. Aalfian, Design of a welding table as a medium for determining elbow points and joints. Teknosains: Jurnal Sains, Teknologi dan Informatika. 11(2), 379-384 (2024) https://doi.org/10.37373/tekno. v11i2.1152
S. Phieboolsilapa, P. Srimuang, J. Yarangsi, A. Pimpru, Design of a welding table prototype based on ergonomics with quality function deployment. Journal of Advanced Development in Engineering and Science. 13(38), 118-133 (2024) https://ph03.tci-thaijo.org/index.php/pitjournal/ article/view/534
S. Tasik, R. Maulidya, I. Utami, D. Safitri, N. Rahmawati, A. Habyba, Integrating ergonomic intervention and digital human modelling for posture improvement in welding tasks. Journal Industrial Servicess. 11(2), 278-299 (2025) http://dx.doi.org/10.62870/jiss.v11i2.31507
M. Sen, A.B. Puri, Development of low-cost conventional milling fixture for micro-friction stir welding process. Welding International. 39, 114-122 (2025) https://doi.org/10.1080/09507116. 2025.2455089
T. Suokko, T. Oksanen, A. Reiman, Productivity and employee well-being in manufacturing process development - comparison study of two departments. Applied Ergonomics. 125, 104460 (2025) https://doi.org/10.1016/j.apergo.2024. 104460
M.H.A.A. Bakar, N. Zulkefli, A.H. Ahmad, S.A. Osman, T.S. Kiat, S.A. Osman, Improving weld accuracy and reducing production time through fixture-assisted TIG welding. Journal of Mechanical Engineering. 14, 1-17 (2025) https://doi.org/10.24191/jmeche.v14i1.8780
B. Prianto, A.N. Haryudiniarti, E.W. Gustany, S. Restuasih, Zulhamidi. Improving the assembly time of a plate cover product through fixture design. Journal of Global Engineering Research and Science. 3(1), 27–33 (2024) https://doi.org/10.56904/j-gers.v3i1.84
I G.B. Susana, A.A.A. Triadi, W. Kawirian, Ergo-mechanical applications in small-scale smaw welding table design. Jurnal Pendidikan Teknik Mesin. 24(2), 32-37 (2024) https://doi.org/10.15294/hpkf3b19
International Ergonomics Association (IEA), What Is Ergonomics (HFE)? Available online: https://iea.cc/about/what-is-ergonomics/ (accessed on July 1, 2026)
D.C. Montgomery, Design and analysis of experiments (10th ed., Wiley, 2020)
M. Kraska, Repeated measures design. In The SAGE encyclopedia of research design (2 ed., 4, 1396-1398, SAGE Publications Inc., 2022) https://doi.org/10.4135/9781071812082.n518
Occupational Safety and Health Administration (OSHA), Welding, Cutting, and Brazing—Hazards and Solutions. Available online: https://www.osha.gov/welding-cutting-brazing/ hazards-solutions (accessed on July 2, 2026)
A.I. Pascual, H. Smedberg, D. Högberg, A. Syberfeldt, D. Lämkull, Enabling knowledge discovery in multi-objective optimizations of worker well-being and productivity. Sustainability. 14(9), 4894 (2022) https://doi.org/10.3390/su14094894
A. Muthohar, A. Yohanes, Pengelasan sprocket dengan alat bantu untuk meminimalisir kelelahan dan meningkatkan produktifitas di PT IMC dengan pendekatan ergonomi. Jurnal Serambi Engineering. 10(3), 14078-14084 (2025) https://jse.serambimekkah.id/index.php/jse/article/view/973
C. Santos, C. Dias, Note on the coefficient of variation properties. Brazilian Electronic Journal of Mathematics, 2(4), 101-111 (2021) https://doi.org/10.14393/BEJOM-v2-n4-2021-58062
Komarudin, Towip, Perancangan meja las yang ergonomis berdasarkan analysis REBA di Universitas Sebelas Maret. Jurnal Ilmiah Pendidikan Teknik dan Kejuruan. 15(1), 70-82 (2022) https://doi.org/10.20961/jiptek.v15i1.60068
K. Abushgair, O.Z. Abueed, M. Mistarihi, S. Abueed, From ergonomics to embodiment: redesigning welding workstations for posthuman learning environments. Journal of Posthumanism. 5(5), 828-849 (2025) https://doi.org/10.63332/joph.v5i5.1408
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Abstract views: 0
,
PDF Downloads: 0


3.png)









