Circular Polarization of the Square, Circular, Triangle, and Hexagonal Microstrip Antenna

Authors

  • Nurhayati Nurhayati Universitas Negeri Surabaya
  • Paulen Aulia Lutfia Universitas Negeri Surabaya
  • Raimundo Eider Figueredo Sobrinho Instituto Federal de São Paulo
  • Alexandre Manicoba de Oliveira Instituto Federal de São Paulo
  • João Francisco Justo Filho Universidade de São Paulo
  • Takeshi Fukusako Kumamoto University

DOI:

https://doi.org/10.26740/inajeee.v3n1.p5-9

Keywords:

circular polarization, square patch, triangle patch, microstrip antenna, axial ratio

Abstract

Microstrip antenna with circular polarization can be applied for many applications. Some microstrip antenna with square, circular, triangular, and hexagonal shape has been designed to get return loss, axial ratio, and radiation performance. We compare twelve microstrip antenna by maintaining its substrate dimension, feeding shape, and outer patch dimension. Even though antenna has a circular patch, it doesnt always produce circular polarization. From the simulation, we found that with add some structure, the antenna can reach multiband resonance from 1 to 6 GHz. The Circular patch antenna reached seven numbers of the multiband resonance frequency. The hexagonal patch antenna reaches the highest directivity as 9.53 dBi. The circular polarization is achieved for a square and Hexagonal patch shape with axial ratio value is 1.96 dB at 4 GHz and  1.26 dB at 4.1 GHz sequentially at phi 900 and theta 900. 

References

[1] P. N. Shinde, J. P. Shinde, and S. J. E. G. Sathiarai, œCircularly Polarized Meandered Rotated Square Microstrip Antenna for Multiband Applications, Proc. - 2018 4th Int. Conf. Comput. Commun. Control Autom. ICCUBEA 2018, no. 1, pp. 25, 2018, DOI: 10.1109/ICCUBEA.2018.8697530.
[2] Y. X. Xu, S. X. Gong, and Y. Guan, œDesign of a double feed circularly polarized rectangular microstrip patch antenna on a circular asymmetrical carrier, 2012 Int. Conf. Microw. Millim. Wave Technol. ICMMT 2012 - Proc., vol. 3, pp. 965968, 2012, DOI: 10.1109/ICMMT.2012.6230162.
[3] D. Q. Lai and Q. X. Chu, œA stacked dual-band equilateral-triangular circularly polarized microstrip antenna, Proc. 2008 Asia Pacific Microw. Conf. APMC 2008, pp. 03, 2008, DOI: 10.1109/APMC.2008.4958153.
[4] F. Y. Zulkifli, E. T. Rahardjo, and D. Hartanto, œRadiation Properties Enhancement Of Triangular Patch Microstrip Antenna Array Using Hexagonal Defected Ground Structure, Prog. Electromagn. Res. M, vol. 5, pp. 101109, 2008.
[5] T. Ferdous, A. Nayna, and F. Ahmed, œComparative Study of Rectangular and Circular Microstrip Patch Antennas in X Band, 2014.
[6] R. Kumar and A. Saxena, œElliptical Microstrip Patch Antenna For Circular Polarization Design Using HFSS, pp. 14081411, 2016.
[7] J. P. Shinde, R. Kumar, and M. D. Upline, œCircular polarization in defected Hexagonal shaped microstrip antenna, Wirel. Pers. Commun., vol. 75, no. 2, pp. 843856, 2014, DOI: 10.1007/s11277-013-1394-3.
[8] M. L. Jong, S. K. Nae, and S. P. Cheol, œA circular polarized metallic patch antenna for RFID reader, 2005 Asia-Pacific Conf. Commun., vol. 2005, no. October, pp. 116118, 2005, DOI: 10.1109/APCC.2005.1554030.
[9] A. Dastranj, F. Ranjbar, and M. Bornapour, œA new compact circular shape fractal antenna for broadband wireless communication applications, Prog. Electromagn. Res. C, vol. 93, no. March, pp. 1928, 2019, DOI: 10.2528/PIERC19031001.
[10] J. S. Roy and M. Thomas, œDesign of a circularly polarized microstrip antenna for WLAN, Prog. Electromagn. Res. M, vol. 3, pp. 7990, 2008, DOI: 10.2528/PIERM08050506.
[11] D. Rusdiyanto, F. Y. Zulkifli, and E. T. Rahardjo, œA circularly polarized microstrip antenna for GPS application as small boat guidance, IEEE Reg. 10 Humanit. Technol. Conf. R10-HTC, vol. 2018December, pp. 13, 2019, DOI: 10.1109/R10-HTC.2018.8629818.
[12] Z. Zhong, œA Foldable Circular Polarized Microstrip Antenna Array for Satellite Communication, 2018 12th Int. Symp. Antennas, Propag. EM Theory, pp. 14, 2018.
[13] A. A. Deshmukh, P. Kadam, and P. Zaveri, œOn the design of circularly polarized U-slot cut square microstrip antenna, 2017 2nd Int. Conf. Commun. Syst. Comput. IT Appl. CSCITA 2017 - Proc., pp. 275280, 2017, DOI: 10.1109/CSCITA.2017.8066568.
[14] K. Ding, C. Gao, T. Yu, and D. Qu, œBroadband C-shaped circularly polarized monopole antenna, IEEE Trans. Antennas Propag., vol. 63, no. 2, pp. 785790, 2015, DOI: 10.1109/TAP.2014.2380437.
[15] H. Iwasaki, œA circularly polarized small-size microstrip antenna with a cross-slot, IEEE Trans. Antennas Propag., vol. 44, no. 10, pp. 13991401, 1996, DOI: 10.1109/8.537335.
[16] O. K. K. Sarkodie, K. Kai, and M. Abdullah, œA square slot circularly polarized microstrip antenna with enhanced bandwidth, 2017 Int. Appl. Comput. Electromagn. Soc. Symp. - Italy, ACES 2017, vol. 2017March, pp. 12, 2017, DOI: 10.23919/ROPACES.2017.8026882.
[17] Y. Yoshitake and T. Fujimoto, œTriple band circularly polarized square microstrip antenna with crank slits, ISAP 2014 - 2014 Int. Symp. Antennas Propagation, Conf. Proc., pp. 529530, 2015, DOI: 10.1109/ISANP.2014.7026759.
[18] Wang, Yang-Kai, Chen, and Hua-Ming, œA Circularly Polarized Square-Ring Patch Antenna for GPS Application, no. 1, pp. 47, 2008.

Downloads

Published

2020-02-26

Issue

Vol. 3 No. 1 (2020)

Section

Articles

License

Copyright (c) 2020 INAJEEE : Indonesian Journal of Electrical and Electronics Engineering

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

Retained Rights/Terms and Conditions of Publication

 

1. As an author you (or your employer or institution) may do the following:

  • make copies (print or electronic) of the article for your own personal use, including for your own classroom teaching use;
  • make copies and distribute such copies (including through e-mail) of the article to research colleagues, for the personal use by such colleagues (but not commercially or systematically, e.g. via an e-mail list or list server);
  • present the article at a meeting or conference and to distribute copies of the article to the delegates attending such meeting;
  • for your employer, if the article is a ‘work for hire, made within the scope of your employment, your employer may use all or part of the information in the article for other intra-company use (e.g. training);
  • retain patent and trademark rights and rights to any process, procedure, or article of manufacture described in the article;
  • include the article in full or in part in a thesis or dissertation (provided that this is not to be published commercially);
  • use the article or any part thereof in a printed compilation of your works, such as collected writings or lecture notes (subsequent to publication of the article in the journal); and prepare other derivative works, to extend the article into book-length form, or to otherwise re-use portions or excerpts in other works, with full acknowledgement of its original publication in the journal;
  • may reproduce or authorize others to reproduce the article, material extracted from the article, or derivative works for the authors personal use or for company use, provided that the source and the copyright notice are indicated, the copies are not used in any way that implies ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA endorsement of a product or service of any employer, and the copies themselves are not offered for sale.

All copies, print or electronic, or other use of the paper or article must include the appropriate bibliographic citation for the articles publication in the journal.

 

2. Requests from third parties

Although authors are permitted to re-use all or portions of the article in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use. Requests for all uses not included above, including the authorization of third parties to reproduce or otherwise use all or part of the article (including figures and tables), should be referred to ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA by going to our website www.unesa.ac.id

 

3. Author Online Use

  • Personal Servers. Authors and/or their employers shall have the right to post the accepted version of articles pre-print version of the article, or revised personal version of the final text of the article (to reflect changes made in the peer review and editing process) on their own personal servers or the servers of their institutions or employers without permission from ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA, provided that the posted version includes a prominently displayed ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA copyright notice and, when published, a full citation to the original publication, including a link to the article abstract in the journal homepage. Authors shall not post the final, published versions of their papers;
  • Classroom or Internal Training Use. An author is expressly permitted to post any portion of the accepted version of his/her own articles on the authors personal web site or the servers of the authors institution or company in connection with the authors teaching, training, or work responsibilities, provided that the appropriate copyright, credit, and reuse notices appear prominently with the posted material. Examples of permitted uses are lecture materials, course packs, e-reserves, conference presentations, or in-house training courses;
  • Electronic Preprints. Before submitting an article to an INAJEEE Journal, authors frequently post their manuscripts to their own web site, their employers site, or to another server that invites constructive comment from colleagues. Upon submission of an article to INAJEEE Journal, an author is required to transfer copyright in the article to ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA, and the author must update any previously posted version of the article with a prominently displayed ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA copyright notice. Upon publication of an article by the ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA, the author must replace any previously posted electronic versions of the article with either (1) the full citation to the work with a Digital Object Identifier (DOI) or link to the article abstract in INAJEEE journal homepage, or (2) the accepted version only (not the final, published version), including the ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA copyright notice and full citation, with a link to the final, published article in journal homepage.

 

4. Articles in Press (AiP) service

ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA may choose to publish an abstract or portions of the paper before we publish it in the journal. Please contact our Production department immediately if you do not want us to make any such prior publication for any reason, including disclosure of a patentable invention.

 

5. Author/Employer Rights

If you are employed and prepared the article on a subject within the scope of your employment, the copyright in the article belongs to your employer as a work-for-hire. In that case, ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.

 

6. ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA Copyright Ownership

It is the formal policy of ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of the ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others. ELECTRICAL ENGINEERING DEPARTMENT, UNIVERSITAS NEGERI SURABAYA distributes its technical publications throughout the world and does so by various means such as hard copy, microfiche, microfilm, and electronic media. It also abstracts and may translate its publications, and articles contained therein, for inclusion in various compendiums, collective works, databases and similar publications

 

Every accepted manuscript should be accompanied by "Copyright Transfer Agreement" prior to the article publication.

Abstract views: 308 , PDF Downloads: 787

Most read articles by the same author(s)